0
  • -30%
  • New
  • Pack
  • Save 30%

Grow Tent Set Silver 80x80x180 HPS 250W

€353.17
€504.53

Instead of €504.53

Product for pre-order

Complete set of all the necessaries for 3–5 plants. Please read brief and clear description below — what parts are included and what to do with them.

This pack contains

OSRAM Plantastar 250W
€33.99
x 1
Reflector cable male 2m, IEC connector
€4.62
x 1
Black Box Silver 80x80x180
€162.31
x 1
Stucco reflector
€17.24
x 1
Clip fan 2-in-1
€22.92
x 1
All-Purpose hose clamp 60-135mm
€1.68
x 3
Combi tube 125mm, 1m
€3.87
x 1
Vents TT 125 P, 280m3/h, speed control
€89.46
x 1
SUPER-FIX Light Weight hangers 2 X 2.5KG
€7.06
x 1
K2600 125mm 240–360m3/h, Eco Line
€64.05
x 1
Adhesive PVC tape 50mm x 10m
€2.79
x 1
Thermohygrometer ProHygro Medium with remote probe
€16.78
x 1
Carabine 40x4mm
€0.96
x 3
Steel chain, 1 m
€1.12
x 3
Extension socket with switch 5x16A, 1.0 m, Zenitech
€8.39
x 1
Mechanical Timer 24h, 15min step, Superplant
€13.98
x 1
Magnetic Ballast 250W, Superplant
€45.75
x 1

Grow Tent Set Silver 100х100х200 LED 300W includes

Grow tent Black Box Silver 80x80x180 cm

Grow tent is very easy to assemble. Collapsible strong stable frame made of metal tubes and hard plastic connectors, on which a tent is put on; Two rails for hanging equipment can withstand up to 36 kg. Two mounting sleeves (Ø 15 cm) + a smaller one for cables (Ø 9 cm). Door with a zipper on the front wall. Velcro mesh ventilation window on the side wall for passive airflow.

HPS lamp Osram Plantastar 250W

Efficient, durable HPS lamp for faster, healthier year-round plant growth. Power consumption 250 W.

Reflector Stucco E40

E40 socket. The most budget-friendly solution for effectively directing light onto plants.

Magnetic Ballast Superplant 250W

Magnetic ballast with fuse and IEC cable for HPS and MH 250W.

IEC cable for connecting a reflector with a ballast

Length 2 m.

Hangers for lighting Super-Fix Light Weight

Hangers for equipment under 5 kg, with adjustable height.

Mechanical Timer Superplant

Analog timer with 24-hour (daily) cycle, 15 minute steps. You DO NOT need to start it every day, just set it up once and it will work in the selected mode continuously. When it's time to reset the cycle (e.g. change lighting hours from 18/6 to 12/12), simply push/pull the appropriate petals.

Active Carbon Filter Prima Klima K2600 125 mm / 240–360 m3/h

Carbon filter is installed at the beginning of the ventilation duct, where air is taken in. The filter is connected to the air duct with a clamp, the joint is additionally sealed with PVT tape. Duct, clamp and tape are also included in this set.

Ventilation connection diagram

The filter will last for 2–3 cycles, then you will need to take a new one. This is a budget model with no feature of coal replacement. Optionally, you can choose a filter with the possibility of replacing the carbon. Activated charcoal for replacement is also available in our store.

Duct Fan Vents TT-125 P, 125 mm / 280 m3/h

Pulls out the air purified through the carbon filter. Same the filter, it is connected to the air duct with clamps and PVT tape. Built-in speed controller. Power consumption 23–37 W.

Circulation Fan 15 W

Mixes the air inside the tent, that uniforms the microclimate. Air blows on plants making them train to resist the “wind”, their structure strengthens. Easy attachable to the tube frame of the grow tent. Two speeds. The diameter of the blades is 15 cm, the protective grille is 20 cm. Adjustable axis of the head. Power consumption 15 W.

Thermohygrometer ProHygro Medium

Shows the temperature and humidity inside the grow tent. The remote sensor allows you to place the display outside, convenient way to keep an eye for control. It also shows the minimum and maximum values for the past 24 hours.

Duct Combi Tube 125 mm, 1 m

Flexible, durable air duct made of laminated aluminum foil, polyester and PVC on a high carbon steel wire frame.

Steel Chain, 1 m, 3 pcs

Three pieces of chain one meter each for hanging the filter and duct fan.

Carabiner 4x40 mm, 3 pcs

Steel carabiners for securing chains.

PVT Tape 50 mm, 10 m

Adhesive tape for sealing the joints of the ventilation equipment.

Clamp 60–135 mm, 3 pcs

Steel clamps for fixing the duct on the equipment flanges. Tightened over PVT tape.

Extension Socket 5x16A, 1m

Maximum power 3680 W.

Energy consumption per month, kW

  • Lighting mode 18/6 — 172 kW
  • Lighting mode 12/12 — 127 kW