Dimlux Maxi Controller Evo Datalog 1.4

In addition to having 7 different options, the Maxi Controller Evo Datalog of Dimlux can add light intensity as a function of the temperature of the room. When temperature settings are exceeded, the lights are automatically dimmées or turned off partially in order to lower the temperature.

There are several sensors that can be added to the Maxi Controller Evo Datalog of Dimlux. In fact, you can connect a hygrometer and a thermometer in order to improve the optimization of your weather conditions. The data retrieved by the controller are then analyzed and combined in order to obtain the best ratio temperature/humidity.

One Maxi Controller Evo Datalog of Dimlux can control up to 160 kit lamp Expert series.

Two systems of lighting DimLux Expert Series can be directly connected to the controller. The following light shall be connected between them in series. The controller can also be connected directly to the wall without the use of relays, devices stopwatch and timer. This is safer and also allows you to reduce costs.

The plants do not use photosynthesis until a certain temperature is reached. The ignition or the éteignage suddenly the lamps can be stressful for the plants, and also produces condensation which can cause mould formation.

The Maxi Controller Evo Datalog of Dimlux program, therefore, an ignition and éteignage progressive lights to replicate the sunrise and sunset.

Systems lighting Dimlux are the only ballast without power of appeal. The ballast classics require between 50 to 160A on startup so that the ballasts digital Dimlux are equipped with the technology of soft-start, so that the inrush current is limited to 50 to 60 amps. This seems low, but multiplied by the number of ballasts (160 for example), this saves a lot of energy.