Dimmable digital ballast Superplant 250-660W

It has a high power factor, high luminous efficacy and low THD.

For MH or HPS bulbs

Make sure that the lamp wattage and voltage match the specifications of the All in One ballast Superplant.

Its high operating frequency (60KHZ-130KHZ.) provides constant power output to the lamp, extending lamp life and increasing light efficiency.

Growing area: 150 x 150 cm

Flowering area: 120 x 120 cm

DIMMABLE DESIGN

This design can run one lamp at rated power and features a four-phase controller to set the ballast output to 250W, 315W, 400W, 600W or 660W. The latter power corresponds to the Super Par function, which will increase brightness by 10%.

Make sure you run your lamp continuously at 100% for 10 minutes before switching to other settings. Switching settings quickly can damage the lamp.

PROTECTION MECHANISM

This ballast is equipped with short-circuit protection, open-circuit protection, ignition failure protection and end-of-lamp-life protection technology.

Technical specifications

• Lamp: 250-400W-600W lamps (MH/HPS)
• Input power: 680W
• Input voltage range: 176-264V
• Input voltage: 220-240V
• Input current: 3A
• Input frequency: 50/60Hz
• Max. output power: 660W
• Output frequency: 60KHZ
• Dimmer operation: 250W - 315W - 400W - 600W - 660W
• Leakage current: 2.35mA
• Total harmonic distortion: <8%
• CF Lamp / peak factor: <1.6
• Power factor: > 0.98
• Open circuit voltage: 250Vrms
• Operating frequency: 60KHZ-130KHZ
• Ignition voltage: 3.5KV-4KV
• Ignition time: 30MS
• Inrush current: 6.5A
• Current protection: 5A
• Insulation resistance: 5MΩ
• Insulation voltage: 3.5KV
• Lamp failure detection: YES
• Lamp power: Constant
• Lamp flicker - acoustic resonance: NO
• RF interference: NO
• Max. case temperature: 80°C
• Ambient temperature: -25 to 40°C
• Operating humidity: 20% - 95%
• IP environment required: IP23
• Unit weight: 2.2 Kg
• Unit dimensions: 198 x 200 x 100mm