- Save 10%
Grow Tent Set Eco 60x60x140 LED 105W
Instead of €412.35
Complete set of all the necessaries for one small/medium plant. Please read brief and clear description below — what parts are included and what to do with them.
Grow Tent Set Eco 60х60х140 LED 105W includes
Grow tent is very easy to assemble. Collapsible strong stable frame made of metal tubes and hard plastic connectors, on which a tent is put on; Two rails for hanging equipment can withstand up to 36 kg. Two mounting sleeves (Ø 15 cm) + a smaller one for cables (Ø 9 cm). Door with a zipper on the front wall. Velcro mesh ventilation window on the side wall for passive airflow.
Quantum board with Samsung diodes and reflector. The full spectrum of light covers all the needs of plants at all stages of life. Hangers are included. Does not require additional cooling. Power consumption 105 W.
Analog timer with 24-hour (daily) cycle, 30 minute steps. You DO NOT need to start it every day, just set it up once and it will work in the selected mode continuously. When it's time to reset the cycle (e.g. change lighting hours from 18/6 to 12/12), simply push/pull the appropriate petals.
Carbon filter is installed at the beginning of the ventilation duct, where air is taken in. The filter is connected to the air duct with a clamp, the joint is additionally sealed with PVT tape. Duct, clamp and tape are also included in this set.
Ventilation connection diagram
The filter will last for 2–3 cycles, then you will need to take a new one. This is a budget model with no feature of coal replacement. Optionally, you can choose a filter with the possibility of replacing the carbon. Activated charcoal for replacement is also available in our store.
Pulls out the air purified through the carbon filter. Same the filter, it is connected to the air duct with clamps and PVT tape. Two operating speeds. The kit does not include a speed switch. Power consumption 21 W (1st gear) / 33 W (2nd gear).
The manufacturer does not supply a power cable with this model, so it is sold separately. All the other Vents-TT series fans are supplied with cables included.
Mixes the air inside the tent, that uniforms the microclimate. Air blows on plants making them train to resist the “wind”, their structure strengthens. Easy attachable to the tube frame of the grow tent. Two speeds. The diameter of the blades is 15 cm, the protective grille is 20 cm. Adjustable axis of the head. Power consumption 15 W.
Shows the temperature and humidity inside the grow tent. The remote sensor allows you to place the display outside, convenient way to keep an eye for control. It also shows the minimum and maximum values for the past 24 hours.
Flexible, durable air duct made of laminated aluminum foil, polyester and PVC on a high carbon steel wire frame.
Steel Chain, 1 m, 3 pcs
Three pieces of chain one meter each for hanging the filter and duct fan.
Carabiner 4x40 mm, 3 pcs
Steel carabiners for securing chains.
PVT Tape 50 mm, 10 m
Adhesive tape for sealing the joints of the ventilation equipment.
Clamp 60–135 mm, 3 pcs
Steel clamps for fixing the duct on the equipment flanges. Tightened over PVT tape.
Protects electrical equipment from overloads up to 13500 A. In case of a power failure, the surge protector will prevent your electrical equipment from burning out.
Energy consumption per month, kW
- Lighting mode 18/6 — 91 kW
- Lighting mode 12/12 — 72 kW