HY-Filter 125mm 400m3/h

Find the range of carbon filters with the best quality/price ratio on the market: the Hy-Filter V2 Carbon!

Products by brand Winflex Ventilation, specialising in climate management, Hy-Filter V2 Carbon filters, in its second generation, provide better odour treatment (96%) and a more meticulous finish, by means of a foam pre-filter and two fixing elastics to attach the pre-filter to the filter itself.

Relatively compact for its performance, Hy-Filter V2 Carbon filters will delight all growers with small budgets.

Autonomy of the Hy-Filter V2 Carbon 400 m3/h flange 125 mm: 18 months of use.

Maximum volume of air extractor to be connected: 400 m3/h.

Dimensions : 50 x 15 cm.

Hy-Filter V2 Carbon 400 m3/hour: 125 mm.

Weight: 8.5 kg.

Precautions when using a carbon filter :

Indoor Discount recommends you to choose and properly maintain your Hy-Filter V2 Carbon :

- select your filter so that its maximum accepted flow rate is greater than or equal to that of the air extractor installed;

- place the filter inside and at the height of the growing area, at the inlet of the duct (duct) leading to the extractor

- check the overall condition of the pre-filter (or protective wadding) surrounding the carbon filter, i.e. as soon as it is tarnished (pollution, dust, pollen, etc.), remove the pre-filter from the carbon filter and clean it at 30°C in the washing machine to finish with a natural drying process

- install the carbon filter as indicated above, at the moment when the odours become too strong, i.e. during flowering or declared fruiting, keeping the climate tightly below 70% humidity, so as not to permanently destroy the efficiency of the Hy-Filter V2 Carbon filter.